Universal Bus 380V 5.5KW Servo Drive For Vertical Packing Machine
5.5KW Servo Drive
Power 5.5KW
Three Phase 380V
Modbus / CanOpen / EtherCAT
Location, Speed and Torque Control Mode
23 bit Tamagawa absolute encoder;
Products Description
| Product Name | 5.5KW Servo Drive |
| Brand | Vector |
| Model No. | VEC-VC-01233H-M-E |
| Power | 5.5KW |
| Input/Output | Pulse / Analog |
| Voltage | 380V |
| Phase | Three Phase |
| Rated Current | 12A |
| Communication Protocols | Modbus / CanOpen / EtherCAT |
| Encoder | 23 bit Tamagawa absolute encoder; |
Installation Precautions
● When installing, do not block the suction and exhaust ports, and do not allow foreign objects inside the product to enter,
otherwise it may cause malfunction or fire due to aging of internal components.
● Do not place heavy objects on or under this product as this may result in injury.
● Please install in the following environment:
1.places without direct sunlight;
2.Locations where the ambient temperature is in the range of 0 ° C to 55 ° C;
3.Relative humidity in the range of 0% to 95%, and no condensation;
4.Locations free of water droplets, vapors, dust and oily dust;
5.Locations where there is no high heat device;
6.Non-corrosive, flammable gas and liquid sites;
7.It is not easy to splash water, oil and medicine;
8.places that are not exposed to radioactive radiation;
9.Strong and vibration-free places;
10.Locations where there is no electromagnetic noise interference.
The panel contains 5 buttons and 5 digital tubes.
The general functions of the five buttons are shown in the table below.
| Key Name | Key function |
| Mode | mode switch, return to the previous menu |
| ▲(add) | increase flashing bit value of the LED digital tube |
| ▼(dec) | Decrease flashing digit value of the LED digital tube |
| ◄◄(shift) | Moves the blinking LED tube to the left; checks the high value of data
longer than 5 bits; Fault reset;execute Fn function |
| SET | read/write parameter values |
Accessories:
| | Accessory name | Image | |
| Satandard Spare Parts | Power terminal |  | Adapt to E1,E2 structure drive |
| Cn3 encoder plug | Encoder plug on the driver side |
| Cn4 control terminal plug | Input/output signal terminals,user wiring |
| Encoder connection line | The standard cable length is 3, 5, 8, 10, 13, 15 meters, according to customer
needs Provide independent connector |
| Power line | The standard cable length is 3, 5, 8, 10, 13, 15 meters, according to customer
needs Provide independent connector |
| Drive monitoring line | Connect and adjust the software for remote monitoring and firmware update |
| Purchasing Spare Parts | USB to RS232 Adapter cable | If necessary, self purchase |
| Ethernet communication line | If necessary, self purchase |
Other Questions:
Q1. How to select the suitable model?
A: Please confirm your requirements for Rated Power, Current, Voltage,
Torque and select the suitable model based our model list;
Q2. How to set the programming system?
A: Our Servo drive support the Global Communication protocols: Modbus/CANopen/EtherCAT,
Please Just make the programming follow your experiences;
Q3. What's the power range about our servo system?
A: Our Power range covers 0.2-110KW, reach your requirements;
Q4. What's the encoder feedback interfaces we using?
A: We have multiple Encoder feedback interfaces, like : incremental/wire-saving encoder,
17-bit/23-bit/24-bit absolute encoder, resolver encoder, etc.
Certificates
1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical, thermal and energy in Section 5-1 of the
variable speed electric driver system), corresponding to the national standard GB12668.501-2013;
3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system part 3 electromagnetic compatibility
standards and its specific test methods), corresponding to the national standard GB12668.3-2012.
Quality Checking:
Four times Production testing
Two Times 24 hoursTesting
100% Inspection Before Shipping
Delivery Time and Shipping Way
1. For small order we always can delivery out within 1 week.
2. Our products can be shippied via Air, Land or Sea.
| Packing details of Servo Drive |
| Products | E1(3-6A) | E2(7-12A) | E3(16-27A) |
| Ctn. Size | 280*208*78 | 280*208*112 | 375*290*155 |
Our Team:
Product Tags:
|
|
Bus 5.5KW Universal Servo Drive For Vertical Packing Machine Images
|
